Sending A Fax Using Phone Book Numbers - HP LaserJet MFP Analog Fax Accessory 300 Guide

4
5
6
7
Notify/Notification changes the notification setting for the current fax
Note
only. To change the default setting, see "To schedule fax call report
printing" on page 54.
8
9
If you have made any changes to the settings on the Settings screen
Note
(such as changing notification or 1-sided to 2-sided ), a Processing Job
screen displays asking "Would you like to keep your current settings?".
If you press Yes, the MFP returns you to the Fax screen and the
settings you made are retained which allows you to send another fax
using the same settings. If you press No, the settings are cleared
(returned to their default values) and the MFP home screen is
displayed.

Sending a fax using phone book numbers

The fax phone book feature is available when the MFP is configured
to use the HP MFP Digital Sending Configuration software. If the
MFP has not been configured for use with this software, the Phone
Book button will not display. To configure the MFP for use with the
HP MFP Digital Sending Configuration software, see the HP MFP
Digital Sending Software User Guide or the HP MFP Digital Sending
Software Support Guide.
ENWW
On the Settings screen touch Fax Settings to make adjustments
to the following settings:
• Sharpness - resolution
• Background Removal - to remove background that might
result from a copying color paper for example.
When all settings are completed, touch OK to return to the
Settings screen.
On the Settings screen, to adjust the lightness/darkness of the
fax you are sending, touch the Light or Dark arrows and touch
OK to return to the Settings screen.
When all settings are completed on the Settings screen, touch
OK to return to the Fax screen.
To change notification, touch Notify. Make changes to notification
settings and then touch OK to return to the Settings screen. For
additional information about notification, see "Changing
notification settings" on page 27.
Touch the one touch speed dial key for the speed dial you want.
Touch Start to send the fax. You can either touch the Start
button on the touch screen or press the green Start button on the
control panel.
Sending faxes 23