Winding The Bobbin - JUKI HZL-353Z Série Manuel D'instructions

- Place the thread and spool
- Snap thread into thread guide.
- Wind thread clockwise around
- Thread bobbin as illustrated
- Push bobbin spindle to right.
- Hold thread end. (6)
- Step on foot control pedal. (7)
- Cut thread. (8)
- Push bobbin spindle to left (9)
When the bobbin winder
spindle is in "bobbin winding"
position, the machine will not
sew and the hand wheel will not
turn. To start sewing, push the
bobbin winder spindle to the left
(sewing position).
30

Winding the bobbin

cap onto the spool pin.
For small thread spools, place
small side of spool cap next
to spool. (1)
(2)
bobbin winder tension discs.
(3)
and place on spindle. (4)
(5)
and remove.
Please Note: