Table des Matières
Publicité
7
3.5
0
7
6
5
4
3
2
1
3
4
0
0.5
2
1
50
Straight stitching and
needle position
Turn the stitch selection dial so
that the pointer is set to the
straight stitch.
Generally speaking, the thicker
the fabric, thread and needle,
the longer the stitch should be.
Choose your needle position,
from center position to left
needle position by changing the
stitch width dial from "0" to "7".
Zigzag stitching
Turn the stitch selection dial to
zigzag stitch.
Function of zigzag dial
The maximum zigzag stitch
width for zigzag stitching is "7";
however, the width can be
reduced on any patterns. The
width increases as you move
zigzag dial from "0" - "7". For
twin needle sewing, never set
the width wider than "4". (1)
Function of stitch length dial
while zigzaging
The density of zigzag stitches
increase as the setting of stitch
length dial approaches "0".
Neat zigzag stitches are usually
achieved at "2.5" or below. (2)
Satin stitch
Closed up zigzag stitches
(close together) are referred to
as a satin stitch. Set the stitch
length between "0" - "1".
Publicité
Table des Matières
Dépannage
