Key Menu - Cappuccino Selection; Key Menu - Milk Selection; Key Menu - Chocolate / Solubles Selection (Where Contemplated) - Faema BARCODE Traduction Des Instructions D'origine

19.2 Key menu - Cappuccino selection

Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The following message will appear on the
display:
KEY MENU
Type
repetition
Milk dose
Emulsion
Cold milk dose
The following cappuccino selection parameters can be
modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1););
- emulsion ((foamed milk dispensing time, 0 ÷ time set in
the milk dose);

19.3 Key menu - Milk selection

Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The display appears as follows:
KEY MENU
Type
repetition
Milk dose
Emulsion
Cold milk dose

19.4 Key menu - Chocolate / Solubles selection (where contemplated)

Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The display appears as follows:
KEY MENU
Type
repetition
+ u
1 cappuccino
001
07.0
07.0
u
00.0
+ u
1 milk
001
07.0
07.0
u
00.0
+ u
1 chocolate
001
u
- cold milk dose (cold milk dose; the setting of this parameter
makes it possible to obtain warm milk; setting between 0 to
20 with increments of 0.1 seconds);
- water dose (volumetric dosage pulses, from 0 to 999, with
increments of 1);
- grinder (chosen between grinder MM1 or MM2);
- coffee dose... (coffee dose grinde ...impulses, 0 ÷ 200 with
increments of 1);
- water start (determines if the water must be added (before)
or (after) the coffee dispensing);
- Additional water (volumetric dosage pulses, from 0 to 999,
with increments of 1).
The components - * - are applied only in some produit
configurations
The dose setting for both grinders has a field range of + 5 of
the value set in the technical programming menu.
Example
technical programming
coffee dose MM1 045
coffee dose MM2 020
The following cappuccino selection parameters can be modi-
fied:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1););
- emulsion ((foamed milk dispensing time, 0 ÷ time set in
the milk dose);
- cold milk dose (cold milk dose; the setting of this parameter
makes it possible to obtain warm milk; setting between 0 to
20 with increments of 0.1 seconds).
The following chocolate (or other soluble beverage) selection
parameters can be modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099).
81
customer programming
coffee dose MM1 040÷050
coffee dose MM2 015÷025