Data Menu: Counters; Data Menu: Accounting - Faema BARCODE Traduction Des Instructions D'origine

18. DATA menu: COUNTERS

Access the DATA MENU, pressing the "i"
following will be displayed:
DATA MENU
COUNTERS MENU
ACCOUNTING
Use the "+" (30) and "-"
on the COUNTER line, then press the PRG

18.1 DATA menu: ACCOUNTING

DATA MENU
COUNTERS MENU
ACCOUNTING
Use the "+" (30) and "-"
on the ACCOUNTING line, then press the PRG
The following will appear on the display:
ACCOUNTING
COUNTERS MENU
Pressing again the PRG (29) key, on the display will appear
the number of all dispensings performed and the number of
dispensing for each selection key:
COUNTERS MENU
Total:
Sel. 01
Sel. 02
Sel. 03
Sel. 04
(27) key. The
+ u
u
(31) keys to position the cursor
(29) key. The
+ u
u
(31) keys to position the cursor
(29) key.
+ u
u
+ u
125348
40254
32005
10258
u
9820
following will appear on the display:
COUNTERS MENU
N° coffee
N° milk
N° solub. 1
N° solub. 2
N° water
To access the various menus, position the cursor on the line
that interests you, using the "+" (30) or "-" (31) keys.
Press the PRG (29) key and then press the "+"
(31) keys to reset the number. The meter will be reset.
When the key is pressed, zeroing is confermed.
Press the RES (24) key to return to the main menu.
The total number of coffees and the number of cycles CANNOT
be zeroed.
The total number of grinding procedures recorded for the two
grinders (MM1 and MM2) can only be zeroed by the installer
technician when the grinders are replaced.
Placing the cursor on the various selections, the led associated
to the key remains ignited:
COUNTERS MENU
Total: 125348
Sel. 01 40254
Sel. 02 32005
Sel. 03 10258
Sel. 04
COUNTERS MENU
Total: 125348
Sel. 01 40254
Sel. 02 32005
Sel. 03 10258
Sel. 04
Note: the total number and numbers of single selections
CANNOT be zeroed.
79
+ u
25
15
12
10
u
10
(30) or "-"
+ u
u
9820
+ u
u
9820