Roco multiMAUS Manuel page 48

1.3. "DELETE"
You use this menu item to remove a locomotive from the library.
The first screen shows the locomotive last used in locomotive mode. Use the "arrow keys" to select the loco-
motive you wish to remove.
To confirm, press the "Light / OK" key.
▪
The scrolling text "DELETE LOCO?" appears in the next screen.
To confirm the deletion, press the "Light / OK" key. You return to the start level "DELETE".
▪
The locomotive is removed from the library and, if it is still travelling, is stopped automatically (selective
emergency stop). The locomotive can only be controlled using locomotive address mode until it is entered in
the library again.
1.4. "SEARCH"
This could be one of the most important functions of your multiMAUS. You can use this menu item to assign
a locomotive address to the corresponding locomotive in the library.
Simply enter a locomotive address using the "function keys" and the multiMAUS will find the corresponding
locomotive in the library.
Press the "Light / OK" key to confirm the entry. The multiMAUS returns directly to locomotive mode and
▪
display the assigned locomotive.
If the multiMAUS does not find the corresponding locomotive for the address, "ERR 9" appears in the display.
You can use the "STOP" or "Light / OK" key to return to the start level "SEARCH".
1.5. "SEND"
1.6. "RECEIVE"
You require both of these menu items when you wish to transfer the locomotive library from one multiMAUS
to another multiMAUS (or several multiMAUS devices). To do so, you set the transmitting multiMAUS
to "SEND" and the other multiMAUS or multiMAUS devices to "RECEIVE". You start the transmission by
pressing the "LIGHT / OK" key on the transmitting multiMAUS. When the transfer is complete, the receiver
multiMAUS is in library mode, the transmitting multiMAUS is at the start level "SEND".
1.7. "MODE"
You can either control a locomotive from library mode as set in the factory or simply using the locomotive
address. You can select which of the settings you prefer using this menu item.
You select the respective mode using one of the "arrow keys". The modes are displayed in scrolling text.
To confirm, press the "Light / OK" key. You return to the start level "MODE".
▪
48
48
1. The "Loco" Menu