Warning
This vehicle is equipped with an energy-saving
CPU. If the key stays ON for a long period but the ignition
button is not pressed within 15 seconds, the CPU will
stop operating to avoid current absorption. Move the key
to OFF and then to ON again.
Note
To move the key to the last two positions, press it
down before turning it. Switching to (B), (C) and (D), you
E
will be able to take the key out.
16
Left switch (fig. 7)
1) Dip switch, light dip switch, two positions:
position
position
2) Switch
centre position = OFF;
position
position
To cancel turn indicators, return switch to central position
and push in.
3) Button
4) Button
A
B
C
D
fig. 6
= low beam on;
= high beam on.
= 3-position turn indicator:
= left turn;
= right turn.
= warning horn.
= high-beam flasher.
1
4
2
3
fig. 7