Side Panniers - Ducati ST4s 2001 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Removing the upper and lower body panels together
Remove the side guards of the instrument panel and the
headlamp fairing.
Unscrew the fastening screw (1, fig. 31.1) that holds
each body panel to the side frame on the left side or to
the expansion reservoir on the right side and the rear
screws (2) that hold each of them to the frame bracket.
Unscrew the front fastening screw (3, fig. 31.2) that
holds each body panel to the front baffle.
Unscrew the rear fastening screw (4) holding each body
E
panel to the frame.
Unscrew the two lower fastening screws (5) holding the
body panels to the central air conveyor.
Unscrew one of the two screws (6) joining the body
panels together. Remove the body panels.
44
1
2
fig. 31.1
4
6

Side panniers

The motorcycle comes ready to fit the side panniers.
Side panniers kit in the same colour as the motorcycle is
available from Ducati Parts Department.
Kit includes all parts needed to install the panniers as
well as the relevant instructions.
3
5
fig. 31.2

Publicité

Table des Matières
loading

Table des Matières