Throttle Cable Adjustment - Ducati ST4s 2001 Manuel De L'utilisateur

Warning
When refitting the cover, be sure to slide the cable
properly onto the suitable pulley and inside the guide in
the cover (3).
Refit the cover and tighten the screws (2).
To ensure smooth operation of the stand joints, clean off
any dirt and apply SHELL Alvania R3 at all points exposed
to friction.
E
1
2
50

Throttle cable adjustment

The throttle twistgrip must have a free play of 1.5 - 2 mm
measured at the edge of the twistgrip, at all positions of
the handlebars. If it needs adjusting, use the suitable
adjuster (1, fig. 38) provided on the throttle control.
3
fig. 37.1
1
fig. 38