Tegradoser-1 Mounting; Fitting Tegradoser-1; Removing Tegradoser-1 - Struers TegraPol 11 Manuel D'instructions

TegraDoser-1 Mounting

Fitting TegraDoser-1

Removing TegraDoser-1

32
TegraPol-11/ -15
TegraForce-1
Instruction Manual
TegraDoser is mounted on the side of the TegraForce. The interface
between the TegraForce and TegraDoser is achieved through the D-
Sub connector located in the recess on the side of the TegraDoser.
With the bottle containing the required suspension or lubricant:
Swing the dosing nozzle on TegraDoser aside to gain access to

the connector.
Insert TegraDoser into the recess on the side of TegraForce.

Press downwards until TegraDoser clicks into position.

Swing the dosing nozzle back in to position under the body of

TegraDoser.
Swing the dosing nozzle outwards away from TegraForce until it

is clear of the connector.
Grip the sides of the bottle and pull upwards until the

TegraDoser comes clear of TegraForce.
Connector