Preparation With Tegraforce - Struers TegraPol 11 Manuel D'instructions

Preparation with TegraForce

28
TegraPol-11/ -15
TegraForce-1
Instruction Manual
From the Main Menu select Preparation and Press ENTER


to activate the Preparation Menu.


Within this menu, there are 4 preparation parameters.
Parameter
TegraPol - 11
Speed *
Disc
Holder
Time
Force (N)
/Direction
Water
Recommendations for Grinding
* Please see
Use the Arrow buttons

 preparation parameter.

The TegraPol software is now ready to begin the preparation
process.
The TegraForce must be locked in position before the preparation process
can be started. Otherwise manual preparation can be started or the Spin
Settings for
TegraPol - 15
50 - 300 40 - 600
50 - 150
60m 00s
|
05m 00s
|
01m 00s
|
00m 05s
10 – 50
C.W. or C.C.W
ON or OFF
to select the desired

Important!
function can be activated..
Change
Increment
10 rpm
30s
10s
5s
5 N
on page 29.