Struers TegraPol 11 Manuel D'instructions page 4

TegraPol-11/ -15
TegraForce-1
Instruction Manual
TegraForce-1
Safety Precaution Sheet
To be read carefully
before use
The operator should be fully aware of the use of the machine according
1.
to the Instruction Manual.
Keep your hands clear of the specimen holder or specimen mover plate
2.
when lowering TegraForce-1.
Do not touch the rotating parts during operation.
3.
When working at machines with rotating parts care has to be taken that
4.
clothing and/or hair cannot be caught by the rotating parts. Appropriate
safety clothing must be used.
If you observe malfunctions or hear unusual noises - stop the machine
5.
and call technical service.
Alcohol based consumables: follow the current safety rules for
6.
handling, mixing, filling, emptying and disposal of the alcohol-based
liquids.
If the TegraPol with TegraForce has to be moved to a new location the
7.
TegraForce has to be detached from the TegraPol. (See section
Installing TegraForce)
The equipment should only be used for its intended purpose and as detailed in the Instruction Manual.
The equipment is designed for use with consumables supplied by Struers. If subjected to misuse, improper
installation, alteration, neglect, accident or improper repair, Struers will accept no responsibility for
damage(s) to the user or the equipment.
Dismantling of any part of the equipment, during service or repair, should always be performed by a qualified
technician (electromechanical, electronic, mechanical, pneumatic, etc.).