SWM SILVER VASE Mode D'emploi page 141

Masquer les pouces Voir aussi pour SILVER VASE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

- Screw in the four supplied screws (8) with rele-
vant washers.
8
- Use a screwdriver to disconnect the connectors
(9) of the rear turning indicators and pull out the
cables from the straps.
9
- Remove the handles with relevant turning indica-
tors from the frame, unscrewing the screw (10)
from the nut welded on the frame and the screw
(11) from the relevant nut (12).
10
8
- Unscrew the nuts (13) of the turning indicators and
remove them from the relevant handles.
- Insert the turning indicator cable (14) into the hole
(15) of bracket (16).
12
11
- Screw in the nuts (13) securing the turning indica-
tors to the bracket (16).
13
15
16
14
16
13
EN - 67

Publicité

Table des Matières
loading

Table des Matières