Taillight Bulb Replacement - SWM SILVER VASE Mode D'emploi

Masquer les pouces Voir aussi pour SILVER VASE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

TAILLIGHT BULB REPLACEMENT

(SILVER VASE / GRAN TURISMO)
5/21W bulb.
- Undo the two screws (1) and remove the lens (2).
- Remove the bulb (3) by pushing and turning it an-
ticlockwise.
- Fit a new bulb in the bulb holder, pushing and turn-
ing it clockwise to lock it into place.
- Refit the lens (2) and tighten the screws (1) without
forcing.
2
EN - 60
TAILLIGHT BULB REPLACEMENT (GRAN MILANO)
- The taillight (1) is type LED; if it does not work, re-
place it.
1
NUMBER PLATE LIGHT BULB REPLACEMENT (GRAN
MILANO)
- Undo the three screws (1) on the number plate
holder.
- Remove the bulb by pulling it out of the bulb hold-
er (2).
- Fit a new bulb in the bulb holder (2) and lock it into
place.
3
- Refit the bulb holder (2) and screw the three
screws (1) back into the number plate holder
1
1
1
2

Publicité

Table des Matières
loading

Table des Matières