SWM SILVER VASE Mode D'emploi page 140

ASSEMBLING THE SINGLE-SEAT TAIL SECTION
- Unscrew the nuts (1) securing the seat to the
frame.
1
- Lift the seat (2) and pull it out of the front hook.
2
EN - 66
- Disconnect the rear light connector (3) and the
plate light connector (4).
3
- Turn the saddle (2) and unscrew the screws (5)
fastening the passenger seat.
5
- Remove the passenger seat (6).
4
- Insert the tail section (7) pushing it in fully so that
the fastening holes of the tail section match the
holes on the saddle (2).
2
5
6
7
2