SWM SILVER VASE Mode D'emploi page 138

- Unscrew the nut (10) securing the turning indicator
to the bracket (11).
11
- Pull out the turning indicator cable (12) from hole
(13) of bracket (11).
11
12
EN - 64
- Assemble the left turning indicator on the left han-
dle by screwing in nut (10).
10
- Assemble the handles with relevant turning indi-
cators on the frame, screwing in the screw (14) on
the nut welded on the frame and the screw (15)
with the relevant supplied nut.
13
14
- Slide the turning indicator cables, securing them to
the frame with straps and reconnect the relevant
connectors (9).
10
- Reconnect the rear light connector (3) and the
plate light connector (4), matching the colours:
• Green wire connected with yellow wire.
• Black wire connected with brown wire.
15
9
3
4