SWM SILVER VASE Mode D'emploi page 136

ASSEMbLY INSTRUCTIONS FOR TWO-SEAT SAD-
DLE / SINGLE-SEAT TAIL SECTION
(GRAN MILANO)
INTRODUCTION
CAUTION*: Regarding to general safety warn-
ings, please follow the rules prescribed in the
vehicle's workshop manual.
WARNING*: All operators to convert the bike
from single-seat to two-seat or viceversa
must be performed by qualified technical
personnel in an workshop authorised by the
manufacturer.
- Scrupulously perform the operations described
in this manual in sequence paying attention to
tighten the screws to the indicated tightening tor-
ques.
EN - 62
BATTERY DISCONNECTION
- Remove the left lateral panel working as follows:
- Detach the panel (1) from the bottom attachment
by pulling it outwards.
- Lift out the panel (2) by unhooking it from the top
hooks.
For refitting, operate in reverse order from removal.
- Disconnect the battery (2) the black minus cable
(3) , by unscrewing the related clamp.
3
2
1
2
ASSEMBLING THE PASSENGER SEAT
- Unscrew the two nuts (1) which fix the seat to the
chassis.
1
- Lift the seat (2) and extract it from the front lock.
2