SWM SILVER VASE Mode D'emploi page 137

- Disconnect the rear light connector (3) and the
plate light connector (4).
3
- Turn the seat (2) with the tail section, then un-
screw the four screws (5).
5
2
- Pull the tail section (6) outward.
4
- Assemble the passenger seat (7) on seat (2).
2
5
- Screw in the supplied screws (8) with the relevant
washers to secure the saddle (7).
8
6
- Use a screwdriver to disconnect the connectors (9)
of the rear turning indicators and pull out the ca-
bles from the straps.
7
7
8
9
EN - 63