(Gran Milano); Compression Adjustment - SWM SILVER VASE Mode D'emploi

FRONT SUSPENSION ADJUSTMENT

(GRAN MILANO)

You can adjust the compression (ADJUSTER "A") and
extension (ADJUSTER "B") in the front suspension.
EXTENSION ADJUSTMENT
Standard setting:
- 10 clicks
To reset standard calibration, turn adjuster (B)
clockwise to reach the fully closed position; then,
turn it back by the mentioned clicks. In order to
obtain a smooth braking action, turn the adjuster
counter clockwise "F". Vice versa to obtain a harder
"S" braking action.

COMPRESSION ADJUSTMENT

Standard calibration :
- 4 clicks
To reset to the standadr calibration turn register (A)
clockwise until the position of fully closed is reached
then, turn back by the mentioned clicks. To obtain
a smoother braking action, turn the register anti-
clockwise "F". Reverse the operation in order to ob-
tain a harder action "S".
Note*: Do not force the adjusting screws beyond
the maximum open and closed positions..
S
F
A
S
F
b
REAR SHOCK ABSORBER SPRING PRELOAD
ADJUSTMENT
The rear shock absorber (1) spring preload can ad-
justed; to make the adjustment, operate as follows:
1. Clean ringnut (2) and adjusting nut (3) of the
spring (4).
2. Either with a hook wrench or an aluminium
punch, loosen the lock ring nut.
3. Turn the adjuster ring nut as required.
4. When the adjusting operation is over (according
to your weight and riding style), tighten the lock
ring nut. (Torque: 36.2 ft/lb).
WARNING*: be careful not to touch hot exhaust
pipe while adjusting the shock absorber.
CAUTION*: both rear shock absorbers have to be
adjusted in the same way.
1
3
2
4
EN - 45