Data Bank Abbreviations - SICE A98 Manuel D'instructions

Aligner software upgrade
The aligner is provided with the software already installed plus an installing DVD-ROM also
supplied as standard. Once the aligner has been installed, switch on the machine and display
the starting screen. On the screen, at the bottom right, you will see the software version.
Compare this software version (indicated as "SW STD ...") with that indicated
on the installation DVD-ROM supplied together with the aligner. If the DVD-ROM version is
newer than the one installed, upgrade the aligner software.
Detailed information on the software upgrade is given in the booklet leaflet attached to the DVD-ROM.
For additional information about the technical features, warnings, maintenance and any
other data about the monitor or the printer, read the relative Users manuals supplied with
machine documentation.
Enabling extra wheel aligner functions
Additional wheel aligner functions are enabled by updating its main protection card.
Upgrading is performed with the "Upgrade SIM CARD" obtained by ordering the relative
accessory kit.
Upgrade cards are marked with specific symbols for identification. More detailed information on
identifying upgrade cards is given in the leaflet accompanying the upgrade card itself.
/ Separates different models
4WD Four Wheel Drive
4WS Four Wheel Steering
4x4 Four wheel drive
8565050+ From this chassis number
8565050- Up to this chassis number
ALU Lightweight alloy wheels
AS Pneumatic suspension system
HS Hydraulic suspension system
CAB With cab
CABR. Cabriolet
CYL Cylinders
DR Door
ESTATE Estate version (station wagon)
FWD Front wheel drive
HD Heavy-duty or offroad
LHD Left hand drive
PAS Power assisted steering
R Radial
RHD Right hand drive
BT "BIAS" tyre
RT Radial tyre
RWD Rear wheel drive
S Special or sport
SPORT Sport
SLS Self levelling suspensions
SW Station wagon
T Turbo
TD Turbo diesel
TDI Turbo diesel injection
ATTENTION

Data bank abbreviations

9