SICE A98 Manuel D'instructions page 65

Opens the customer record management window.
Prints out the final record of the job done.
Sets chassis clearance data input with unit of measurement in millimetres.
Sets chassis clearance data input with unit of measurement in degrees.
Displays the window for input of a new Customer - Vehicle - Make - Operator.
Displays the operator management window.
Displays a window with a list of working windows. Used for skipping between
windows.
Displays the service programme selection window.
Recalls the window for selection of the vehicle from the databank.
Skips vehicle selection from the databank by selecting "typical vehicle" mode.
Blocks data to allow for target levelling.
Unblocks previously blocked data to allow for target levelling.
Opens the job record for input of the customer and vehicle data
Aborts the job in progress and goes back to the "starting screen".
Exits the aligner program and Windows, initiating the correct power-down
procedure (available only from the starting screen)
Returns to the window which opened a list of options (only available in windows
with a list of options).
The tables below provide a list of the icons available in the windows, with a list of options
(menus for skipping between windows) and the description of the relative functions.
21