Technical Data; Working Range - SICE S 63 Manuel D'instructions

diately.
- Flange holder for centring accessories.
- Top tray to take weights of all types.
- Automatic start by lowering the guard.
- Luminous digital display unit double
display and 3D graphics.
- Microprocessor processing unit (32 bit).
- Resolution: 1g (1/10oz).
- Wide selection of programmes making the
machine easy to use.
- Unbalance value display in grams or
ounces.
- Unbalance display rounding-off setting.
- Balancing modes available:
• Standard dynamic balancing on both rim
sides.
• Alu / Alu P seven different routines for
alloy rims.
• Motorcycle Dynamic dynamic balancing on
both sides of motorcycle rims.
• Motorcycle ALU dynamic on both sides
of alloy motorcycle rims.
• Static on a single side.
- "Shift planes" programme (in Alu P) for
using multiple five gram weights, i.e.: avail-
able without the need for partial cuts.
- "Hidden Weight" programme (in Alu P) in
order to divide the outer side balancing
adhesive weights into two equal weights
positioned behind the spokes of the rim.
- "Split Weight" programme (motorcycle
programmes) to divide the weight into
two equivalent values to be placed on
either side of the spoke.
- "OPT flash" programme for rapid optimi-
sation of operating noise reduction.
- General utility programmes:
• calibration
• service
• diagnostics.
- Possibility to select the position for apply-
ing the adhesive weight:
• Operator side horizontal plane (H3).
• Vertical plane in the lower part of the
wheel (H6).
• Vertical plane in the upper part of the
wheel (H12).
50

TECHNICAL DATA

- Single-phase power supply voltage:
100/115 ±10%, 200/230 V ±10%, 50/60 Hz
- Rated power: 100 W
- Rated current: 1 A at 100-115V, 0.5 A at
200-230V
- Balancing speed: 90/130 rpm
- Maximum unbalance value calculated:
999 grammes
- Average wheel spin time (with 5"x14"
wheels): 7 s
- Shaft diameter: 40 mm
- Working environment temperature:
5° to 40°C
Machine dimensions (Fig. 9/9a)
• depth with guard closed: 1277 mm
• depth with guard open: 846 mm
• width with guard: 1282 mm
• width with automatic sensor for
width measurement:1444 mm
• height with guard closed: 1334 mm
• height with guard open:2196 mm
• depth without guard: 700 mm
• width without guard: 1249 mm
• height without guard: 1441 mm

Working range

• rim width setting range: from 1.5" to 20"
• rim diameter measurable with the sensor
(version with automatic sensor):
from 11" to 28"
• rim diameter setting range: from 1" to 35"
• max wheel/machine distance: 360 mm
• max wheel width (with guard):
600 mm
• max wheel diameter (with guard):
1117 mm
- Maximum wheel weight: 75 kg.
- Machine weight with guard (without acces-
sories) and without the external sensor:
User manual S 63