Customer Record Window; Operator Record Window - SICE A98 Manuel D'instructions

- F3 (or "Enter") confirms selection of a vehicle and advances to the window which displays
the vehicle data.
- F5 to print the complete list of the vehicles stored in the file.
- F6 modifies the data of the vehicle selected from file
- F7 deletes the selected vehicle from file
- F8 enters a new vehicle on file
- F10 returns to the job record input window.
Notes
• Press F8 to enter a new vehicle; the program checks if it is stored in the file when the car
number is entered. If the data are present, the program signals it and asks if they have to be
displayed. If you answer yes, the window is automatically filled in. If you answer no, an empty
window appears so that the car number can be entered.
• If the customer data are changed or new data are entered for the first time, the program asks if you
wish to access the customer data sheet management window for entering and storing the data.
To access this window, press the F7 key from the job record input window.
It displays the list of customers saved on file.
To make the selection, proceed as described in the "General considerations" section.
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 returns to the previous window
- F3 (or "Enter") confirms selection of a customer and advances to the window which displays
the customer data.
- F5 to print the complete list of the customers stored in the file.
- F6 modifies the data of the customer selected from file
- F7 deletes the selected customer from file
- F8 enters a new customer on file
- F10 returns to the job record input window.
Notes
• Press F8 to enter a new customer; the program checks if the customer is stored in the file
when the relevant data are entered. If the data are present, the program signals it and asks if
they have to be displayed. If you answer yes, the window is automatically filled in. If you
answer no, the window appears completely empty.
To access this window, press the F8 key from the job record input window.
It displays the list of operators saved on file.
To make the selection, proceed as described in the "General considerations" section.
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 goes back to the previous window
- F3 (or "Enter") confirms selection of an operator and advances to the window which displays
the operator's data.
- F5 prints the complete list of the operators stored in the file.
- F6 modifies the data of the operator selected from file
- F7 deletes the selected operator from file
- F8 enters a new operator on file

CUSTOMER RECORD WINDOW

OPERATOR RECORD WINDOW

26