Steering Window - SICE A98 Manuel D'instructions

This window is used for playing video clips, which illustrate the procedure for adjusting the
following angles:
- rear toe
- rear camber (or inclination)
- front toe
- toe curve (for Audi/Volkswagen)
- front camber (or inclination)
- caster and king pin angle (King pin)
Certain angles may be adjusted, in which case the corresponding animations will or will not
exist, as indicated by the graphics. To select a video clip, press key F5 or F6 and then press to
switch to F3 step-by-step display.
When the video clip of the adjustment has finished, key F5 or F6 can be used to scroll through
the various steps of the procedure.
To switch from step-by-step viewing mode to selection of an angle video clip for display, use the
"Tab" or "Shift" + "Tab" keys.
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 (or "Esc"): halts playback of the clip or returns to the previous screen
- F3 (or "Enter"): starts or replays the animation
- F5 Scrolls down through the adjustment selection list /moves on one step in display of the
clip for an adjustment.
- F6 Scrolls up through the adjustment selection list /moves back one step in display of the
clip for an adjustment.
- F10 returns to the starting window.
For executing the 10° or 20° steering for calculating: caster, king pin angle, included angle, toe-
out on turn at 20°( fig. 12).
If turntables with graduated scales are fitted, maximum steering can also be measured visually
and the reading performed can be entered in a suitable window using the keyboard.Admitted
values range from 21.00° to 99.99°; if a value out of that range is entered, the program changes
the entered value to the lowest admitted value (21.00°).
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 goes back to the previous window
- F3 advances to the next screen
- F4 sets:
 Unit of measurement
Angles

• Centesimal degrees
• Sexagesimal degrees
 Wheel aligner
Turntables enabled;

• Always;
• On request;
• Never;
• Yes, steering box check;
Caster measurement steering lock

• 20 Degrees
• As chosen by user

STEERING WINDOW

32