Putting The Unit Into Operation - Tecno-gaz TYGI 350 B Manuel D'utilisation

INSTRUCTIONS FOR USE

7 PUTTING THE UNIT INTO OPERATION

Warning – disinfection of new dental unit before its first use
Before putting the unit into operation, your service technician must carry out disinfection of waterlines of
instruments.
•
switch on the compressor and let it get pressurized with air
•
check the instruments for their positions
•
turn on the main switch
the indicator light of the main switch goes on and the following initial screen is displayed briefly:
After that the main screen is displayed. Grayed options are unavailable.
24.AUG 12:12
DR.SMITH
The unit is connected to the distribution of air. After audible signal (short-long tone), the unit is ready to work.
While the unit is being in process of turning ON:
•
no instruments should be taken off its holder,
•
the foot controller shall be in the rest position and
•
no button on the keyboard should be pressed
UM_EN_TYGI350B_2018-09_ver1.0
TYGI 350 B
TYGI 350 B
9 / 49