INSTRUCTIONS FOR THE USER
ELECTRICAL CONNECTION
Connect the electrical cables to the transformer.
Insert the electrical plug at the base of the battery charger stand and insert the power
plug in the 220 V socket.
The green LED on the stand will light up.
Take the hand piece and insert the battery as shown in the illustration, without forcing
it in.
Slowly insert the optical fibre in the hand piece connection, as shown in the drawing,
and push the optical fibre fully home.
Insert the protective screen at the base of the optical fibre to connect it.
ASSEMBLING THE DEVICE
MOUNTING THE BATTERY
MOUNTING THE OPTICAL FIBRE
MOUNTING THE PROTECTIVE SCREEN
11
Fig. 4
ENGLISH
Fig. 2
Fig. 3