Tecno-gaz TYGI 350 B Manuel D'utilisation page 115

INSTRUCTIONS FOR USE
3-Setting of the value by selection from the options
Some parameters have pre-set values and their selection is made by means of a „pop-up menu". When the button with
the respective parameter is pressed, the menu with pre-set values is displayed, e.g. for the selection of transmission
ratio:
To return without changing the value, press the button „ESC". Press the respective value to set and save it temporarily
(until the change of the program number). If you want the change to be saved permanently into the program, first press
the button . Saving into the memory of the program is indicated by change in the colour
saving into the memory, press the button again.
4-Editing the program name and the user name
Like numerical values, it is also possible to edit the text at program name and the user name. In that case the keyboard
looks as follows:
PROGRAM 3_
0 1
ABC DEF
5 6
PQR STU
ESC BS
Symbols explained:
ESC The button serves to return without changing the text
BS The button serves to delete the last sign
SPACE The button serves to insert a gap
1/A The button serves to change-over between numbers / letters
OK The button serves to end editing and save the changes
UM_EN_TYGI350B_2018-09_ver1.0
2 3 4
GHI JKL MNO
7 8 9
VWX YZ% . , /
SPACE 1 / A OK
TYGI 350 B
. To cancel the
14 / 49