INSTRUCTIONS FOR USE
Setting the user palette
Press the button to display the screen of setting of the colours:
5
4
6
30.JAN 2015
7
8
9
> 1000
10
11
12
+
13
14
15
Setting of the palette
Select the desired colour from pre-set colours at the bottom right part of the screen. If you are not satisfied with the
colour, alter it by means of the buttons at the top right part of the screen. The altered colour is displayed in the box
between the buttons +/-. After the colour has been set, choose the item to which it should be assigned and press the
respective button on the circumference of the left part of the screen to assign it. Repeat the procedure until all the
desired colours have been set. Save the palette by pressing the button „OK". When you press the button „ESC" the
data will not be saved. It is possible to set the following:
1- colour of the background of the pop-up menu
2- colour of icons
3- colour of the background of the active part of the upper and lower row of the display
4- colour of the text of the pop-up menu
5- colour of the text of the inactive part of the upper and lower row of the display– date, time, type
6- colour of the background of the inactive part of the upper and lower line of the display
7- colour of lines
8- colour of bargraph
9- colour of the background of the bargraph
10- colour of the frame at pressing the button
11- colour of the background of the screen
12- colour of adjustable parameters
13- colour of controls in active condition / +-...
14- colour of the icon „main menu"
15- colour of hidden text and icon
In the event of incorrect setting of the colours (the same colour for more items), some of the items might get illegible
and the unit difficult to control. If that is the case, when at least two instruments are taken out of their holders, an error
screen is displayed. At the top left corner there is the icon
. Press the icon to set the default colour palette 1.
UM_EN_TYGI350B_2018-09_ver1.0
3
2
12:55
> 10000
P1
NORM
ESC
1
255
+
P1
-
P2
P3
AFt
OK
255
255
+
+
-
-
TYGI 350 B
18 / 49