Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
8.1.2
System of changing parameters in individual screens
The unit enables the user to set individual parameters.
The parameters can be set using several ways.
1-Setting of the value of a parameter using + / -
-
-
24.AUG
-
-
-
-
> 1000
> 5000
-
-
-
-
-
-
-
-
ENDODONCY
-
-
-
DR.SMITH
Press the button with respective parameter. The buttons that enable to change the value are displayed in red. Change
the value of the parameter by means of the buttons +/- .
The new value is saved temporarily (until the change of the program number) by repeated pressing of the button with
the parameter under setting or permanetly into the program by means of the button
2-Setting of the value of a parameter using keyboard
Press the button
In the keyboard there is displayed the minimum and maximum permissible value for the parameter in question. If the
value is outside the range, this is indicated by this symbol „!!!" and the value will not be accepted when pressing „OK".
The button with decimal point is displayed only if the parameter in question enables so. To return without changing the
value, press ESC.
The new value is saved temporarily (until the change of the program number) by repeated pressing of the button with
the parameter under setting or permanetly into the program by means of the button
the last position.
UM_EN_TYGI350B_2018-09_ver1.0
12:12
INSTRUMENT TYPE
> 20000
PROGRAM 1
P1
1:1
AFt
NORM
to see the keyboard
MIN:100
!!!
0
1
5
6
ESC
BS
> 40000
3.5 Ncm
3.0s
33%
MAX:40000
0
2
3
4
7
8
9
.
OK
TYGI 350 B
40 000
X1/min
+
-
TYGI 350 B
.
. Button „BS" serves to delete
13 / 49
Publicité
Chapitres
