Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GENERAL SAFETY INSTRUCTIONS
1
SYMBOLS USED IN THIS GUIDE
This guide uses symbols to highlight specific texts. The
functions of each symbol are explained below:
Failure to respect the safety warnings could
lead to accident or injury.
O
Instructions which must be followed to prevent
deterioration.
2
IMPORTANCE OF THIS GUIDE
Read this guide in its entirety before carrying
out the installation, and obey all instructions.
Failure to do so may result in a defective
installation, leading to accidents and failures.
3
ENVISAGED USE
This unit has been designed for installation as part of an
automatic opening and closing system for the following
doors and gates:
• Sectional
• Up-and-over, single leaf with side springs
• Up-and-over with counterbalanced leaf or torsion
springs. In this case, it is necessary to install the
NPTOR curved fitting and use a higher power
operator.
4
INSTALLER'S QUALIFICATIONS
Installation
professional installer, complying with the
following requirements:
• He/she must understand the general and
specific rules on safety and preventing
accidents.
• He/she must be capable of carrying out
mechanical assemblies in doors and gates,
choosing
and
systems in line with the assembly surface
(metal, wood, brick, etc.) and the weight and
effort of the mechanism.
5
AUTOMATIC DEVICE SAFETY ELEMENTS
The complete system comprises, apart from the
operator referred to in these instructions, other
elements which should be acquired separately.
The safety of the complete installation depends on
all the elements installed. Install only Erreka
components
operation.
34
Installation guide
should
be
completed
implementing
attachment
in
order
to
guarantee
Work sequences or procedures.
Important details which must be respected for
correct assembly and operation.
Additional information to help the installer.
}
Information on caring for the environment.
Moreover, this guide provides valuable information
which will help you to carry out installation more ef-
ficiently.
This guide is an integral part of the product. Keep it
safe for future reference.
This unit is not suitable for installation in
inflammable or explosive environments.
Failure to install or use as indicated in this
guide is inappropriate and hazardous, and
could lead to accidents or failures.
Using the door to lift people or things is
forbidden.
by
a
• He/she must be able to carry out electrical
installations in accordance with the low
voltage regulation and the applicable or
relevant standards, rules and instructions,
and to recognise the dangers of electricity.
The installation must be carried out taking into
account standards EN 13241-1, EN 12635, EN
12453 and EN 12445, by personnel qualified to
issue the declaration of conformity for the
facility (Machinery Directive).
Respect the instructions for all the elements
used in the installation.
Installing safety elements is recommended.
For further details, see: "Fig. 1 Elements of the
complete installation" on page 35.
proper
Publicité
Chapitres
Table des Matières
