Erreka NAOS Manuel De L'installateur page 51

Lifting and securing the equipment
1
1 3
Attaching the assembly to the rear support
9
B
8
3
P278G
9
8
10
P278H
A
3
10
P278I

The assembly sequence depends on the type of door
and on the space available. A typical case is shown
below.
1 Attach the front part of the guide-track (3) in the
front support (1).
2 Lift the rear part of the guide-track with the
operator (10) already assembled and keep it in
position using an auxiliary tool, in order to secure
the assembly to the rear support (8) and ceiling
strips (9).
O
The guide-track (3) must be horizontal.
1 Attach the rear part of the guide-track + operator
(10) unit to the ceiling strips (9) using the rear
support bracket (8).
2 Secure using the two screws and two nuts (A) and
(B).
O
The guide-track (3) must be horizontal.
NAOS garage door opener operator
INSTALLATION
47