Erreka NAOS Manuel De L'installateur page 63

Step 9 (menu 9): opening mode
Step 10 (menu 10): operations counter
1 With the display showing 9, press SET once: digit 0
will start flashing on the display (this is the preset
value for this parameter).
2 Pressing the |+ and |- buttons, select the required
option:
0: alternative stop + automatic closing optional
(the "alternative stop" option allows the door to
be stopped during opening by pressing the
transmitter or the pushbutton/wall key; the
"optional automatic closing" option allows the
door to be closed by pressing the transmitter or
pushbutton/key before standby time finishes)
1: opening without alternative stop + restart
standby time
M278P9
3 Once the required value is selected, press SET to
confirm and save it.
4 Press the |+ button once to access the next
programming step.

In steps 4 to 12 (menu 4 to 12), programming can
be finished in advance by holding down SET (until
CL is displayed), without having to continue
advancing using the |+ button.
1 With the display showing 9, press SET once: the
digits of the display will start flashing, indicating the
hundreds of operations carried out:
02: indicates 200 operations completed
30: indicates 3000 operations
1ÿ 4 : indicates 14000 operations
5ÿ 9 : maximum value which indicates 59,000
operations
2 Press SET to confirm.
3 Press the |+ button once to access the next
programming step.

In steps 4 to 12 (menu 4 to 12), programming can
M278P10
be finished in advance by holding down SET (until
CL is displayed), without having to continue
advancing using the |+ button.
STARTING UP AND PROGRAMMING
NAOS garage door opener operator
59