Application; Description Of The Components; Structure, Functionality And Performance Characteristics; Combination Products - KLS Martin group Kit de préparation des fibres stérilisable Mode D'emploi

4 Application

The fiber preparation set is used for the intraoperative or postoperative preparation of damaged or highly
carbonized bare fibers or the FlexWave waveguide.
4.1

Description of the components

4.1.1

Structure, Functionality and Performance Characteristics

Fig. 4-1 Stripping tools
Fig. 4-2 Preparation tools
4.1.2

Combination Products

The following products by KLS Martin are intended for use with the sterilizable fiber preparation set:
Catalogue number
79-700-40-04
79-700-60-04
79-700-61-04
79-700-62-04
79-700-80-04
76-800-00-04
Tab. 4-1 Combination Products
28
To remove the buffer from the laser fiber, use the
stripping tool that corresponds to the thickness of
the laser fiber.
1 for 400-µm bare fiber, green grip keys
2 for bare fiber 600 µm and for FlexWave, blue grip
keys
3 for 800-µm bare fiber, yellow grip keys
To shorten, notch, or break the laser fiber, use the
ceramic knife (1) and the silicon working pad (2).
The ceramic knife (1) is ground sharpen on one side.
1 Ceramic knife
2 Silicon surface, blue
Name
Bare fiber laser fiber, 400 µm, 3 m, sterile, single-use
Bare fiber laser fiber, 600 µm, 3 m, sterile, single-use
Bare fiber laser fiber, 600 µm, uni, reusable
Thermostable laser fiber, 600 µm, length 3 m, single-use, sterile
Thermostable laser fiber, 800 µm, length 3 m, reusable, non-sterile
FlexWave waveguide CO2 laser
Sterilizable Fiber Preparation Set
Instructions for Use
Revision 03