Console Holder Arm Assembly - Mondolfo Ferro TB125 Manuel D'utilisation

CAUTION
Gripping various projecting parts of the
structure in a manner not recommended
here is absolutely forbidden.
1
When moving the machine after installation,
position it as shown in Fig.4A to guarantee
that the load is correctly balanced:
turntable holding arm completely lowered,
the turntable closed, the tool holder carriage
at its end of stroke, near the arm.
Fasten the arm with the control console to
the tyre changer structure (see Fig. 4A).
40
CONSOLE HOLDER
ARM ASSEMBLY
Fix the supporting column to the tyre changer
with the 2 M 10x25 screws (see Fig. 4B).
4
Position the arm with the control console on the
column and fix it with the M 10x10 screw, putting
a 10 ø washer in between (see Fig. 4C).
the
Fix the console cable to the column (see Fig. 4D).
4A
- E - User Manual TB125
nglIsh
4B
4C
4D