Description Of The Console Controls - Mondolfo Ferro TBE160 TERRA Manuel D'utilisation

DESCRIPTION OF THE
CONSOLE CONTROLS
The machines can be equipped with control
consoles applied on a control arm (A, Fig.
13) that is integral with the machine itself
or with a console applied to a control lever
on the ground (trolley type) (Fig. 13a) that
is connected to the machine with a cable.
If an accessory radio kit is applied, the
machine with a control lever (trolley type)
can be operated via radio transmission.
A
- Four-position lever (A, Fig. 14) that:
• Uses a horizontal movement to control the translation of both the turntable trolley
and the tool-holder arm.
• Uses a vertical movement to control the upward/downward movement of the turn-
table arm.
- 4-position lever (B, Fig. 14) that:
• Uses a horizontal movement to control turntable rotation.
• Uses a vertical movement to control the upward/downward movement of the tool-
holder arm.
IMPORTANT: When moving the tool-holder arm to the working position, continue to
66
Fig. 13
VERSION WITH CONTROL ARM
- E - Operator's manual
nGlISH
Fig. 13a