Pyrolysis Ovens - Pelgrim OKW740RVS Mode D'emploi

CLEANING
L
P Y R O L Y T I C

Pyrolysis ovens

EN 28
• After cleaning, replace the four rubber corners, taking care to follow
the markings on the glass
• Place the interior glass unit in the door, so that L and R are on the
R
hinge side.
• If your oven has just one interior glass, this will be found next to the
clip-on glass.
• Clip in the final glass by placing the "PYROLYTIC" marking towards
you.
• Remove the red plastic stop.
Your appliance is now ready for use again.
Warning
Remove any cookware, the wire shelf supports, grids and trays from the
oven and clean any major spill residue before carrying out the pyrolysis.
Your oven is equipped with enamelled wire shelf supports: these need to
be removed before running the pyrolysis cycle.