Checking Brake Pads For Wear - Ducati SPORTTOURING ST3 Manuel D'utilisation

Checking brake pads for wear

Front brake (fig. 69)
MIN
1 mm
To facilitate inspection without removing the pads from
the callipers, brake pads have a wear mark. If the grooves
in the friction material are still visible, the pad is still in good
condition.
Rear brake (fig. 69)
E
The friction material on each pad should be at least 1 mm
thick.
Important
Have the brake pads replaced at a Ducati Dealer or
fig. 69
Authorised Workshop.
65