Rh switch (fig. 22 )
1) Button
= emergency flashers, hazard
Press it to activate all turn indicators at the same time.
Press button again to disconnect the flashers.
2) ENGINE STOP switch, two positions:
position
(RUN) = run.
position
(OFF) = stop.
Warning
This switch is mainly intended for use in emergency
cases when you need to stop the engine quickly. After
stopping the engine, return the switch to the
to enable starting.
Important
Stopping the engine using switch (2) when riding
with lights on and leaving the ignition key in the ON
position, may run the battery flat as the lights will remain
on.
3) Button
= engine start.
2
3
position
1
4
E
fig. 22
31