Brakes - Ducati SPORTTOURING ST3 Manuel D'utilisation

Brakes

Front
With double drilled disc.
Housing material:
aluminium.
Braking material:
steel
Disc diameter:
320 mm
E Hydraulically operated by a control lever on right
handlebar.
Disc braking surface:
88 sq. cm
Brake callipers with separate pistons.
Make:
BREMBO
Type:
30/34-4 pistons
Friction material:
TOSHIBA TT2802.
Master cylinder type:
PSC 16.
84
Rear
With fixed drilled steel disc.
Disc diameter:
245 mm
Hydraulically operated by a pedal on RH side.
Braking surface:
25 sq. cm
Brake callipers with separate pistons.
Make:
BREMBO
Type:
P 34.
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11.
Warning
Brake fluid can dissolve paintwork and can cause
severe eye and skin injuries in the event of accidental
spilling. Wash the affected area with abundant running
water.