Télécharger Imprimer la page

Installing The Infrared Receiver; Electrical Connection; Function Test / Ir Remote Control Mounting - Truma Saphir comfort IR Instructions De Montage

Masquer les pouces Voir aussi pour Saphir comfort IR:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23

Installing the infrared receiver

The receiver (14) should preferably be mounted to the ward-
robe in such a way that the remote control can be pointed
at it without obstructions (length of connector cable 3 m).
A 3 m cable extension is available if necessary (part no.
40040-34800).
If the receiver cannot be flush-mounted, Truma can
supply an on-surface frame (15 – part no 40000-52600)
as an accessory on request.
5 5
Ø
15
Fig. 13
Drill Ø 55 mm hole. Lead cable through hole towards the rear
and secure receiver with 4 screws (16). Then fit the cover
frame (17), route the cable to the air conditioning system and
attach to the side of the device.
To finish off the cover frame, Truma can supply side
parts (18) in 8 different colours as an accessory (please
ask your dealer).
230 V electrical connection
The 230 V electrical connection must always be made
by an expert (in accordance with VDE 0100, part 721 or
IEC 60364-7-721, for example, in Germany). The instructions
shown here do not constitute a request to non-experts to
make the electrical connection, but serve as additional infor-
mation for an expert who is employed to do the work!
Make the connection to the mains via the 150 cm long con-
nector cable to a line that is protected with a 10 A fuse in the
vehicle.
It is imperative that connection is carried out with care while
observing the correct cable colours!
All cables must be secured with clamps!
An insulating device for providing all-pole insulation from
the mains with contact clearance of at least 3.5 mm must be
provided at the vehicle end for carrying out maintenance and
repair work.

Function test / IR remote control mounting

Position IR remote control mounting as close as possible to
the IR receiver (14) so that the air conditioning system can
be operated without removing the remote control from the
mounting.
All device functions must subsequently be tested as described
in the operating instructions.
The operating instructions must be handed over to the vehicle
owner.
22
m
m
14
16
18
17
18

Publicité

loading