Instructions For Use; Before Use; Operation Of The Emergency Devices; Checking Operation Of The Emergency Devices - spanesi MINIBENCH MAXIPLUS Manuel D'utilisation Et De Maintenance

SECTION 4

INSTRUCTIONS FOR USE

The MINIBENCH MAXIPLUS can be used either alone as
a simple lift to perform inspections, mechanical repairs,
dismantling of the wheels and other operations, or with the
pull system for straightening and restoring the body and
other parts of the vehicle.
These two ways of using the lift involve different risks and
different procedures for preparing the vehicle.

4. BEFORE USE

WARNING! Before starting the lift, check the
effi ciency of the system and get to know the
control devices.

4.1 OPERATION OF THE EMERGENCY DEVICES

Before beginning work, always check the correct operation
of the safety devices provided by the manufacturer.
4.1.1 CHECKING OPERATION OF THE
EMERGENCY DEVICES
EMERGENCY BUTTON
Check the correct operation of the emergency button as
follows (see fi g.7):
• Power the control unit by means of the switch placed
on the power distribution board.
• Pull the mushroom-shaped emergency button to
release it (1).
• Press the reset button (2) on the right of the mushroom-
shaped emergency button (1).The white pilot light
(3) will come on to indicate that the equipment is
powered.
• Press the <ascent> button (5).
• Keeping the <ascent> button pressed, use your free
hand to press the mushroom-shaped emergency
button (1): the lift should immediately stop.
RESET BUTTON
Check correct operation of the reset button as follows:
• Pull the mushroom-shaped emergency button to
release it (1).
• Press the <ascent> button (5): the lift should remain at
a standstill.
• Press the reset button (2) on the right of the mushroom-
shaped emergency button (1).
• The white pilot light (3) will come on to indicate that the
equipment is powered.
• Press the <ascent> button again (5): the lift should
move upwards.
4
6
1
2
7
11
65
Figure 7
5
3
8
9
10
GB