Description Of The Lift; Application - spanesi MINIBENCH MAXIPLUS Manuel D'utilisation Et De Maintenance

1.3 APPLICATION

The MINIBENCH MAXIPLUS is a machine designed and
built exclusively for lifting vehicles to the height required to
carry out inspections and repairs to the mechanical parts
or bodywork of the vehicle by means of a straightening
system consisting of a hydraulic pull arm.
The operations must be performed observing the maximum
capacity specifi ed in the manufacturer's rating plate.
The machine is not suitable for lifting people:
WARNING! Use of the MINIBENCH MAXIPLUS
for work operations or purposes other than
those specifi ed in this manual is considered
inappropriate
forbidden.

1.4 DESCRIPTION OF THE LIFT

The MINIBENCH MAXIPLUS consists basically of a
mobile welded sheet steel frame which is raised by means
of a pair of single-acting hydraulic jacks which control a
mechanism consisting of a rocker and a pair of connecting
rods that move the arms of the pantograph mechanism.
The essential parts of the lift are (fi g.1 and 2):
FIGURE 1: Overall lift dimensions
and therefore absolutely
FIGURE 2: Perspective view of lift
1) Rubber pads
2) Vehicle clamps
I
3) Upper mobile platform
GB
4) Supports for the pads and clamps
F
5) Pantograph lifting arms
D
6) Pantograph arm movement connecting rods
7) Anti-fall safety hook control pneumatic cylinder
E
8) Anti-fall safety hook
9) Connecting rod control rocker
10) Single-acting hydraulic jacks
11) Fixed base structure
12) Safety lock valve against pipe breakage
13) Protective sheath for electrical cables and fl exible
compressed air and hydraulic fl uid pipes
14) Identifi cation plate
52