Sail (Sailplane); Sailplane Type; Camber Preset; Camber System - Spektrum DX18t Manuel D'utilisation

SAIl (SAIlPlANE)

Sailplane Type

Use the Sailplane Type Screen to select wing and tail types to
match your sailplane model. Diagrams and setup names show
on the transmitter screen to show the available setups.
Wing Tail
• 1 Servo • Normal
• 2 Aileron* • V-Tail A**
• 2 Aileron 1 Flap* • V-Tail B**
• 2 Aileron 2 Flap*
Motor
• 4 Aileron 2 Flap*
• Inhibit
• Assign to a Switch (optional)
Refer to community.spektrumrc.com for more information
about new DX18t AirWare updates to support these options.
* Selection of multiple ailerons activates the Differential
menu option.
** Selection of either of these activates the V-Tail
Differential menu option.

Camber Preset

Camber System

SPEKTRUM DX18t • TRANSMITTER INSTRUCTION MANUAL
NOTICE: Refer to your sailplane manual for recommended control throws.
CAUTION: Always do a Control Test of your model with the transmitter
after programming changes to make sure your model responds as desired.
Image Selection
Press NEXT to select the sailplane image. Highlight and select the
image on screen, then use the scroll wheel to select the image
desired. Press the scroll wheel to select.
Camber Preset is only available when 2 or 4 aileron wing type is selected in Sailplane Type.
The Camber Preset function enables you to program the ailerons, flaps, wing tips and
elevator for a specific position in each Flight Mode.
If flight modes are not active, only one preset position is available and it is always active.
The Camber Preset Speed enables the control surfaces to transition over a period of time,
up to 30 seconds, when you change flight modes.
Move the flight mode switch to the desired position to change the Camber Preset values.
Camber System is only available when 2 or 4 aileron wing type is selected in Sailplane Type.
The Camber System allows in-flight camber adjustment and is also used as the braking
system, often referred to as Crow or Butterfly. The Camber System enables you to assign
the Camber System to a different switch in each flight mode.
EN
37