Common System Setup Functions; Model Select; Model Type; Model Name - Spektrum DX18t Manuel D'utilisation

COMMON SYSTEM SETUP FUNCTIONS

Model Select

Model Select enables you to access any of the 250 internal model
memory locations in the Model Select list.
1. Scroll to the desired model memory in the Model Select list.
2. When the desired model memory is highlighted, press the
scroll wheel once to select the model. The transmitter
returns to the System Setup List.
3. Add a new model by rolling to the bottom of the list. You will
then be prompted with the Create New Model screen, with the
option to create a new model or cancel. If you select Cancel,
the system will return to the Model Select function. If you select
Create, the new model will be created and now be available in
the model select list.

Model Type

Select from Airplane, Helicopter or Sailplane model types.

Model Name

Model Name enables you to assign a custom name to the current
model memory. Model names can include up to 20 characters
including spaces.

F-Mode Setup

Use the Flight Mode Setup menu to assign switches to flight modes.
Mode Number of Switches
Aircraft
2
Heli
3 (including Throttle Hold)
SPEKTRUM DX18t • TRANSMITTER INSTRUCTION MANUAL
Number of Flight Modes
5
5 (including Throttle Hold)
Direct Model Access
Press the Clear and Back buttons from the Main Screen
or a telemetry screen to access Model Select.
IMPORTANT: When you select a new model type, you will delete
any programming data in the current model memory. Always
confirm the desired model memory before changing model types.
It will be necessary to re-bind after selecting the model type.
To change the model type
1. Scroll to the desired model type and press the scroll wheel.
The Confirm Model Type screen appears.
2. Select Yes and press the scroll wheel to confirm the model
type. All data will be reset. Selecting No will exit the Confirm
Model Type screen and return to the Model Type screen.
To add letters to a Model Name
1. Scroll to the desired letter position and press the scroll
wheel once. A flashing box appears.
2. Scroll left or right until the desired character appears.
Press the scroll wheel once to save the character.
3. Scroll to the next desired letter position. Repeat Steps
1 and 2 until the Model Name is complete.
4. Select BACK to return to the System Setup list.
To erase a character
1. Press CLEAR while the character is selected.
2. Press CLEAR a second time to erase all characters
to the right of the cursor.
Flight Mode Wizard
The Flight Mode Wizard resets the Flight Mode Table to the default
settings without affecting the flight mode switch assignments.
EN
13