Spektrum DX18t Manuel D'utilisation page 22

EN
The Extra Settings screen enables you to
• Turn sounds off or on
• Turn vibration off or on
• Change the appearance of the trim indicators
System Sounds
Scrolling to System Sounds and pressing the scroll wheel turns
sounds on (Active) or off (Inhibit). You may disable all sounds by
changing the volume to 0.
Vibrator
The Vibrator value determines how many times the vibration alert
pulses each second. A value of "1" = 1 pulse/second. The value
can be adjusted from 1-10. Use the Warnings menu to turn the
vibration alert off.
Trim Display
Trim display changes the shape of the trim indicators on the
Main Screen.
Display options include
• Boxed Boxes (Default)—The indicators appear as an
outlined box when you adjust the trim.
• Boxed Arrows—The indicators appear as outlined arrows
when you adjust the trim.
• INH—The indicators appear as arrows on lines when you
adjust the trim.
Inhibit removes all trim bars and indicators from the Main Screen.
To change the Trim Display
1. Scroll to Trim Display and press the scroll wheel once.
2. Scroll left or right to change the Trim Display option.
Press the scroll wheel to save the selection.
Voice Volume Control
The Volume Voice Control menu enables you to adjust the default
volume levels for voice alerts in the transmitter. All values are set
to 50% from the factory.
To change the default volume level:
1. Scroll to the voice alert you wish to change, then press
the scroll wheel.
2. Turn the scroll wheel left or right to adjust the value in
10% increments.
3. Press the scroll wheel to save the value.
22
System Warnings
The System Warnings screen enables you to assign either a voice/
vibe or a tone/vibe to the Inactivity and the Low Voltage warnings.
Serial Number
The Serial Number screen displays the transmitter serial number
and AirWare software version.
Reference the Serial Number screen any time you need to register
your transmitter or update the AirWare software from the Spektrum
Community website.
Exporting the Serial Number to the SD Card
You may find it helpful to export the transmitter serial number to a
text file for your personal records or when you are registering the
transmitter on the Spektrum Community.
To export the transmitter serial number
1. Insert an SD Card in the card slot on the transmitter.
2. Scroll to EXPORT and press the scroll wheel. The SD Status
screen appears and should display MY_DX18T.xml in the
middle of the screen.
3. Press the scroll wheel again to return to the Serial
Number screen.
4. Power off the transmitter and remove the SD Card from
the transmitter.
5. Install the SD Card in a card reader connected to
your computer.
6. Open the MY_DX18T.xml file from the SD Card location.
You can then copy and paste the serial number into your
personal records or to the Spektrum Community website.
Locating the Transmitter AirWare Software Version
The transmitter AirWare software version appears between PREV
and NEXT at the bottom of the Serial Number screen. Register
your DX18t to get AirWare software updates and other news at
spektrumrc.com
IMPORTANT: AirWare files are specific to the transmitter serial
number and you cannot transfer AirWare files between
transmitters, i.e., downloading an AirWare software update
once and attempting to install it on multiple transmitters.
Calibrate
The Calibration screen stores the potentiometer endpoints for all
proportional controls. It is mandatory to complete the calibration
after changing the stick mode selection. You may need to calibrate
flybarless control units or re-trim your models after calibrating
the transmitter.
SPEKTRUM DX18t • TRANSMITTER INSTRUCTION MANUAL