Model Utilities; Copy Model; Reset Model - Spektrum DX18t Manuel D'utilisation

EN

Model Utilities

In the Model Utilities function you can create a new model, delete
a model, copy a model, reset a model to default settings and sort
the model list.
Create New Model
Use this selection to create a new model in the model select list.
1. Select Create New Model. Within this screen, you will have
the option to create a new model or cancel.
2. If you select Cancel, the system will return to the Model
Utilities menu.
3. If you select Create, the new model will be created and now
be available in the model select list.

Copy Model

The Model Copy menu enables you to duplicate model
programming from one Model List location to another.
Use Model Copy to
• Save a default model copy before experimenting with
programming values
• Expedite programming for a model using a similar
programming setup
IMPORTANT: Copying a model program from one model memory
to another will erase any programming in the "To" model memory.

Reset Model

Sort Model list
16
Delete Model
Use this selection to permanently delete a model from the model
select list. If you do not wish to delete a model, select Cancel to
exit the page.
1. To delete a model, highlight the model listed. Press to select
2. Select DELETE to delete the model.
To copy model programming
1. Make sure the model program you wish to copy is active. If the
2. Select the model memory next to "To" and scroll to the
3. Select Copy and the Confirm Copy screen appears.
4. Select Copy to confirm. Selecting Cancel will return
5. Select the "To" model as the current model, then bind
You cannot use the Model Copy screen to copy model
programming to an SD Card. To copy model programming
to the SD Card, please see "Transfer SD Card".
Use the Model Reset menu to delete all model programming in the active model memory.
Reset returns all model settings to the default settings and erases all programming in the
selected model.
After a model reset, it is necessary to re-bind.
With this function you can sort the model order in the model select function. This is helpful
to group similar models together to make them easy to find. To move a model, highlight the
model that you wish to move with the scroll wheel, then press the scroll wheel to highlight it.
Then turn the scroll wheel to move the selected model to the position desired. Press the
scroll wheel when you have the model in the position desired.
then roll to the model name. Press the scroll wheel to select.
desired model program is not active, select Cancel and change
the active model in the Model Select menu.
desired model memory. Press the scroll wheel once to
save the selection.
to the System Setup screen.
the transmitter and receiver. Copying a model does not
copy the bind from the original model.
SPEKTRUM DX18t • TRANSMITTER INSTRUCTION MANUAL