Important Notes On Product Liability; Note On Disposal; Guarantee Declaration; Declaration Of Conformity - WAGNER PlastCoat PC15 Mode D'emploi

Plast Coat 15
EDITION 09 /2004

IMPORTANT NOTES ON PRODUCT LIABILITY

As a result of an EC regulation being effective as from January
1, 1990, the manufacturer shall only be liable for his product
if all parts come from him or are released by him, and if the
devices are properly mounted and operated.
If the user applies outside accessories and spare parts, the
manufacturer´s liability can fully or partially be inapplicable;
in extreme cases usage of the entire device can be prohibited
by the competent authorities (employer´s liability insurance
association and factory inspectorate division).
Only the usage of original WAGNER accessories and spare parts
guarantees that all safety regulations are observed.

NOTE ON DISPOSAL

In observance of the European Directive 2002/96/EC on was-
te electrical and electronic equipment and implementation
in accordance with national law, this product is not to be dis-
posed of together with household waste material but must be
recycled in an environmentally friendly way!
Wagner or one of our dealers will take back your used Wagner
waste electrical or electronic equipment and will dispose of
it for you in an environmentally friendly way. Please ask your
local Wagner service centre or dealer for details or contact us
direct.

GUARANTEE DECLARATION

12 months, single shift, 6 months for multiple shifts.
We guarantee this equipment on the following terms: We
will repair or replace, at our discretion, free of charge, all parts
which, within 12 or 6 months from date of purchase, are found
to be wholly or substantially unserviceable due to causes ari-
sing prior to the sale – in particular faulty design, materials or
workmanship. The guarantee does not extend to damage due
to the following causes: Unsuitable or improper usage, faulty
assembly or putting into operation by the purchaser or a third
party, normal wear, negligent handling or servicing, unsuitable
spraying media, particularly corrosive and abrasive materials,
use of substitute materials and the action ofchemical, elec-
tro-chemical or electric agents not attributable to us. Abrasive
spraying media, such as redlead, emulsions, slips and glazes,
liquid abrasives and similar, reduce the life of valves, packings,
gun and tip, as well as of pneumatic pump pistons. The resul-
ting wear is not covered by the guarantee.
The equipment should be inspected immediately upon re-
ceipt. Any apparent defect should be notified in writing to the
supplier or to our works within 14 days, otherwise all rights to
redress are invalidated.
We reserve the right to entrust compliance with the guarantee
to an approved subcontractor.
The granting of this guarantee requires proof of purchase by
presentation of invoice or delivery note.Where the inspection
shows damage not falling within the terms of the guarantee,
the repair will be carried out at the purchaser´s expense.
Subject to modifications · Printed in Germany

DECLARATION OF CONFORMITY

Herewith we declare that the supplied version of
WAGNER PlastCoat 15, 230 V~, 50 Hz
Complies with the following provisons applying to it:
89/392 EEC, 89/336 EEC, 73/23 EEC.
Applied harmonized standards, in particular:
EN 292-1/-2, EN 55 014, EN 60 204-1, EN 60 335-1, DIN EN
12 001 pr.
Applied national technical standards and specifications, in
particular:
VBG 5
Date : 22. 1. 1999
Executive Officer Signature Head of Development
GB
J. WAGNER GmbH
63