Sliding Cover; Sack Mangle; Container Suction System; Compressor (Accessory) - WAGNER PlastCoat PC15 Mode D'emploi

GB
EQUIPMENT OVERVIEW
Accessories for the receptacle
4.3.1

SLIDING COVER

Prevents contamination getting into the coating material. Ex-
tends the hardening time of the coating material, particularly
with direct sunlight.
4.3.2

SACK MANGLE

For using coating material in sacks, a sack mangle can be
placed on the sliding cover.
4.3.3

CONTAINER SUCTION SYSTEM

For sucking up coating material from a container, an external
container can be employed instead of the receptacle.
4.4

COMPRESSOR (ACCESSORY)

V 400 suction volume 360 l/min (fig. 6)
1 Compressor holder
2 Compressed air connection
Note:
Only operate the compressor according operating manual in-
cluded.
6
2
C 350 suction volume 350 l/min (fig. 7)
1 Compressor holder
2 Compressed air connection
Note: Only operate the compressor according to the opera-
ting manual included.
40
7
4.5
MORTAR HOSE WITH ELECTRICAL REMOTE
CONTROL (FIG. 8)
1 Material connection – mortar spraying machine
2 Remote control connection – mortar spraying machine
3 Atomization air connection – compressed air supply
4 Material connection – spray lance
5 Mortar hose
6 Atomization air connection – spray lance
7 Remote control connection – spray lance or remote cont-
rol switch
8
1
Plast Coat 15
1 2 3
7 6 5 4
2
1