Spray Lance With Automatic Control; Spray Lance Without Automatic Control; Transport; Transport Using A Crane - WAGNER PlastCoat PC15 Mode D'emploi

Plast Coat 15
EDITION 09 /2004
4.6
SPRAY LANCE WITH AUTOMATIC CONTROL (FIG. 9)
1 Material connection
2 Switch sleeve, switching the mortar spraying machine on
and off using remote control
3 Texture nozzle
4 Air tap
5 Material tap
6 Remote control connection
7 Atomization air connection
7 6 5
Various different texture nozzles can be fitted to the spray
lance, see accessories page 60, item 1.
The size of the nozzle depends on the grain size of the coating
material and the required spraying pattern.
4.7

SPRAY LANCE WITHOUT AUTOMATIC CONTROL

(FIG. 10)
1 Atomization air connection
2 Air tap
3 Texture nozzle
4 Material tap
5 Material connection
1
10
5
1
2
4
2
4
3
Various different texture nozzle can be fitted to the spray lance,
see accessories page 60, item 1.
The size of the nozzle depends on the grain size of the coating
material and the required spraying pattern.
5

TRANSPORT

• Moving the mortar spraying machine on its wheels: Hold
the fold-out handles (1, fig. 11), lift and move.
• Carrying the mortar spraying machine: Hold the fold-out
handles (1) and front bar (2) and lift.
9
5.1

TRANSPORT USING A CRANE

For attaching points for the straps or rope (not wire cable) see
figure 11.
3
1
GB
TRANSPORT
11
2
41