Abicor Binzel AutoGuide Plus Instructions D'assemblage page 48

7 Operation
7.3 Description of the system control
7.3.1 Monitor
1 Display/touchscreen
Fig. 14 Display/touchscreen
The Hand button allows you to switch between the menu screens and the computer screen. This is possible only if the
AutoGuide is not in automatic mode.
In automatic mode, the AutoGuide autonomously approaches the saved work points. The start signal can be triggered
at the AutoGuide or from the higher-level control.
A virtual keyboard is available for entering parameters you want to change.
1 Virtual keyboard
Fig. 15 Keyboard
EN - 16
2
2 Enter 3
Hand button
1
2
3
4
ESC 4 Back/delete
MON.0016.0 • 2021-02-05
AutoGuide Plus
1
2